Spletcapable of probing the AIT of a material up to 450~ and at oxygen pressure (prior to a thermal excursion) up to 5000 psig (-34.5 MPa). According to the test results, fluorinated polymers including TFE Kel-F* 81, Viton A, Viton A-500 and Fluorel exhibited superior oxygen compatibility property. SpletPCTFE Is a homopolymer of Chlorotrifluoroethylene. Optical transparency, high compressive strength, low deformation under load, rigidity, chemical inertness and effectively zero moisture absorption are just some of the key properties of this polymer.
AF708 PCTFE Material Data Sheet - AFT Fluorotec
SpletKKEL-F (PCTFE)EL-F (PCTFE) Polychlorotrifl uoroethylene polymer (CTFE). It is suitable for use with most of corrosive chemicals, organic solvents, hot water and steam, chlorate gases, cryogenic liquids. PCTFE is not recommended for use with some halogen products. It is light and radiation resistant. Operating temperature: from -50°C to +180°C. SpletLimiting Oxygen Index D2863 % >95 >95 >95 30-36 Dielectric Constant D150 1 MHZ 2.1 2.1 2.1 2.6 Types of Fluoropolymers PTFE (polytetrafluoroethylene) is a high-molecular-weight fluoropolymer that consists entirely of ... PCTFE in 1995 and sold the rights to Daikin, who now produces the resin under the NEOFLON™ PCTFE brand name. racket\\u0027s j5
FEP / PFA / Teftek® Chemical Compatibility - Coating Center
SpletPCTFE: Excellent for cryogenic and Oxygen use. A homo-polymer of Chlorotrifluoroethylene-270°C to 260°C: Virgin PEEK 450G: Excellent chemical resistance and mechanical properties at elevated temperatures. An organic polymer thermoplastic-40°C to 260°C: Carbon Filled PEEK: Many similar properties to Virgin PEEK. SpletCompatibility of Krytox™Lubricants with Different Gases (continued) Krytox™Performance Lubricants Name Formula R# Non-Reactive Methylacetylene C 3H 4N Methylamine CH … SpletTeflon®* PTFE Chemical Compatibility Chart: Check the chemical compatibility of Teflon® and PTFE with various chemicals, solvents, alcohols and other products. Polytetrafluoroethylene (PTFE) is very non-reactive and is often used in containers holding reactive and corrosive chemicals. According to DuPont, its melting point is 600 K (327 °C; racket\\u0027s j3